Undercarriage Make: Berco Track Frame: Rigid Frame Track Rollers: 4 Bottom Shoes per Track: 31 Track Width x Lth: 7" x 48" Ground pressure: 5.9 PSI
Service Refill capacity Fuel Tank: 6.5 Gal Hydraulic Sustem: 19 gal Crankcase: 6 Qt Cooling System: 3 Gal.
2" and 1/2" high tensile steel, unitized with full belly pan, hardened steel pins and bushings, designed for heavy mini dozer servicese.
Miscellaneous Width: 29.5" Length(with blade) 8' Height: 4'7" Ground Clearence: 4" Gross Weight(with blade): 4060 lbs Travel Speed: 0-5 MPH Max Blade Lift: 11" Max Blade Drop: 10" Max Blade Angle: 30 degrees Max Blade Tilt: 25 degrees
Sutter 300 Mini Dozer
Designed for single track trail construction and maintenance, public works, contractors, ranchers and residential.
Introducing the all new one-of-a-kind patent pending Sutter 300 Mini Trail Dozer™
You can build approximately 1000 ft/hour of under 30" wide single track trails. Build trails uphill with ease and rolling dips in minutes. Pay for the Sutter 300 Mini Trail Dozer™ in less than one season with the savings realized from decreased labor costs.
Specifically designed, engineered and tested for single track trail making., wood lots, parks and recreation, city, county, state and federal maintenance work, ranchers, contractors and residential.
Blade 6 way with lift & tilt float
Vandal protection kit
Tach/hourmeter, fuel, water temp & oil pressure gauges
Hydraulic oil site glass & temp gauge
Cold weather starting
Heavy duty engine cooling system
Hydraulic oil cooler
Dry cell battery
Operator bumper pads
Cushioned operator's platform
Light bar with 3 LED lights
Overall, I was very impressed with the quality and capabilities of the machine...
We took some of its listed operational limits and had no problems or unstability. We verified the claim that it can cut trail at 1000' an hour. That was in a section of almost no rocks. Rocks would slow down the process, however we punched through 100' of friable bedrock on a 40 degree slope in about an hour. The six way adjustable blade would just need a purchase point and lifting the blade would break off another section. This obviously wouldn't work in harder rock like granite. It did dislodge and move large boulders up to about 600 pounds with ease. We actuallty didn't run into anything it couldn't move, thanks to the 44 hp turbo diesel at 4,100 lb weight.
The tilt and angle functions of the blade made for easy cross slope adjustments (insloping and outsloping) and actually some pretty dececent rough cut berms. Thanks to the pretty significant blade angle possible. I also used it to rehab some of the social routes with excellent results. It is 30" wide but I found that by cutting partial bench and putting the outside tracks on the spoils, you could end up with a 24" full bench trail. On steeper side slopes you have to go full bench.
Kevin Joell Poedunks, Inc.
Sutter 300 Winch. Mountable in the front (on the blade) or back (under the seat).
Sutter 300 Ripper
Sutter 300 Extreme Cover. Stands up to snow, wind, rain, hail and bird droppings!